Page 260 - CTS - Mechanic Diesel - TP

MECHANIC DIESEL - CITS

Fig 5 Fig 6

Disengaging shackle (link member) from control Unhooking the starting spring
rack

Hold camshaft with slotted wrench by engaging to the coupling at drive end of camshaft. Unscrew round nut with
pin wrench (Fig 7). Remove spring washer .
Remove flyweight assembly (Fig 8). Remove woodruff key from camshaft.

Fig 7 Fig 8

Extracting the governor flyweight
assembly
Unscrewing the round nut from the
governor flyweight assembly

If governor housing is to be removed, roller tappets of pump should be lifted off the camshaft with suitable tappet
lifters. Unscrew the fixing screws . Tap the housing lightly with a rubber mallet and remove (Fig 9). Collect the oil
in a container.

Push out lever shaft and sealing plugs by tapping lightly from one end (Fig 10)
Fig 9 Fig 10

Removing the governor housing Removing the lever shaft

Remove tension lever bymaneuvering it out upwards underneath the swiveling lever (Fig 11).

243

CITS : Automotive - Mechanic Diesel - Exercise 15.3