Page 261 - CTS - Mechanic Diesel - TP

MECHANIC DIESEL - CITS

Fig 11

Removing the tensioning lever

Remove screw , washer and detach the control lever . Remove shim and sealing washer . In case governor is
fitted with speed control device first remove control lever by loosening screw . Remove speed control device by
loosening screws .
Unhook governor spring from tension lever and swiveling lever.

Remove retaining rings with screw driver using suitable protection pad on governor cover seating face to avoid
damage (Fig 12).
Tap the swiveling lever to one side (with a brass drift) so that the bearing bush can slide out of governor cover
(Fig 13).

Fig 12 Fig 13

Removing the bearing bushes
Removing the swivelling lever retaining rings

Remove bearing bush together with ‘O’ ring and Fig 14
closing cap . Move swiveling lever in opposite direction
so as to facilitate removal of the second bearing bush.
Swiveling lever can then be maneuvered out of the
bearing bores. (Fig 14).

Removing the swivelling lever

244

CITS : Automotive - Mechanic Diesel - Exercise 15.3