Page 82 - Mechanic Diesel - TT
P. 82
MECHANIC DIESEL - CITS
5 Fit thrust washers to the crank shaft on the engine block side and tighten their bolts with a torque wrench.
6 Check the cracked shaft by rotating it. The cracked shaft should rotate freely.
7 Fit the timing plate.
8 Fit the fly wheel onto the crank shaft and tighten its bolts with a torque wrench.
9 engine block
10 Insert the piston ring, including the cylinder by pressing it into the ring compressor and onto the crack shaft pin
through the connecting rod and connecting rod cap.
Fit the torque wrench with assistance
11 Fitting the connecting rod cap sequentially, check by rotating the cock shaft. The cock shaft should rotate
freely.
12 Fit the oil pump into the engine block.
13 Install new packing on oil sump and fit oil sump to engine block.
69
CITS : Automotive - Mechanic Diesel - Lesson 19 - 24 CITS : Automotive - Mechanic Diesel - Lesson 19 - 24
