Page 273 - CTS - Sewing Technology - TP - Volume - 2-0

SEWING TECHNOLOGY - CITS

4 Turn the placket piece flat by 180° and make edge stitch on the placket piece along the previous seam.
(Fig 5)

Fig 5

5 Turn the placket piece inside the front piece, press and baste. Finish the placket with hemming stitch.
(Fig 6)

Fig 6

6 Place the other placket piece matching right sides of placket and left front along the center front line, pin
and baste, stitch on the marked seam line, Turn the other raw edge of placket piece by 0.75 cm on its wrong
side and press. (Fig 7)

Fig 7

258

CITS : Apparel - Sewing Technology - Exercise 37