Page 345 - CTS - Sewing Technology - TP - Volume - 2-0

SEWING TECHNOLOGY - CITS

Fig 1 Fig 2

TASK 5: Stitch the Belted shorts
1 Prepare the slant pocket on the marks in front sides.
2 Prepare the zip fly.

3 Set the knife pleats in front on marks. The fold of pleat should be directed towards the pocket.
4 Stitch the darts on marks at the back side. Press and set towards seat seam line.
5 Prepare hip pocket with flap on right side.
6 Join sides of front and back.
7 Prepare the belt and attach on waist line.

8 Stitch the inside leg seam joining front and back together.
9 Stitch crotch from back to front upto zip fly forming cross seam at the joint of seam line.
10 Lock at the end of fly from right side, making a triangle of 0.5 cm with double row of stitching.
11 Clip crotch seam allowance on the shaped portion in diagonal direction up to 5mm.Press it open and set
flat by stretching. Stitch self bound seam on seam allowance. Press and finish at the top with hemming.
12 Inside the short sew the edges of lower end of the shield lining to crotch seam allowances. Be careful,
stitches should not be visible on front side.
13 Prepare 5 belt carrier. Fix one belt carrier on the waist band above each front pleat, one on back centre
seam and one in center between centre seam and pleat.

14 Finish the bottom line with broad hem.

330

CITS : Apparel - Sewing Technology - Exercise 41