Page 347 - CTS - Sewing Technology - TP - Volume - 2-0

SEWING TECHNOLOGY - CITS

Place closed zip on the fly piece wrong side of zip up; leave 0.5 cm from the raw edge and 1 cm above the clip.
Baste 6 mm away from the teeth of zip. Stitch with double seam. (Fig 3)

Fig 3

SWC22P0190

Baste raw edge of facing and lining with left front of shorts Match clip of facing and fly line. Be careful that the edge
of zip is not caught by stitches. (Fold zipper back and if necessary pin it to hold it out of the way). Stitch along the
basting line from dip to waist edge. (Fig 4)
Fig 4

SWC22P0191

Turn facing on seam line away from the front piece. From right side stitch through the facing and all seam
allowances close to the edge of facing up to clip and lock the stitch. (Fig 5)
Fold the facing towards wrong side on the seam line. Baste close to the fold to hold facing in position. From the
right side baste a guide line 3 cm away from the fold, maintaining the shape of fly. Stitch close to the basting line.
(Fig 6)
Stitch the right fly (shield): Take right sides of fly and lining together. Baste and stitch on outer shape. Cut notches
on the round shape. (Fig 7)
Turn right side out. Press and set the outer edge and baste on it up to end. Turn also the edge of the balance part
of lining. Cut notches on the inner curved shape of lining. (Fig 8)
Fold the edge of lining by 1.5 cm to wrong side. Align edge of lining and shield. Baste and press on the lining.
(Fig 9)

Open the zip. Baste the unattached zip part to the fly shield, wrong side of zip on right side of fly shield. Stitch
along the basting but don’t stitch the shield lining. Be careful: the position of the zip should be same as in left side
facing. (Fig 10)

332

CITS : Apparel - Sewing Technology - Exercise 41