Page 225 - CITS - Welder - Trade Practical

WELDER - CITS

EXERCISE 54(C) : Demonstrate fabrication of corner
joints on m.s. plate (sheet 6 mm thick
plate) in vertical downward progression

by GMAW

Objectives

At the end of this exercise you shall be able to
• prepare plate pieces to size as per drawing.
• set and tack weld the plates in alignment as corner joint.
• set the corner joint in vertical position for welding.
• deposit the bead with appropriate amount of filler metal.
• clean and inspect for surface defects and penetration and bead appearance.

208