Page 92 - CITS - Welder - Trade Practical

WELDER - CITS

Fig 3 Fig 4

Fig 5 Fig 6

Fillet ‘T’ joint on MS sheet 2mm thick in flat

position (OAW)

Objectives: At the end of this exercise, you shall be able to
• set the job pieces and tack as fillet tee joint
• select nozzle size, filler rod and set gas pressure for welding
• manipulate the blow pipe and filler rod to deposit weld metal in flat upward direction
• deposit the weld bead without allowing sagging of molten metal
• ensure the root penetration
• clean the joint and inspect for weld defects.

75

CITS : C G & M - Welder - Exercise 15