Page 127 - CITS - Dress Making - TT - 2024

DRESS MAKING - CITS

FLIP HORIZONTAL (Shift + = )
- Select the Tool, Select the Piece
- It is used to Flip the pattern Horizontally.
FLIP VERTICAL ( = )

- Select the Tool, Select the Piece.
- It is used to Flip the pattern Vertically.
FLIP ALONG LINE ( Ctrl + = )
- Select the required line to flip internals or piece along it,Click inside the piece.

- Select Internal to flip along the line
- Select the Mirror line
- Click inside the piece
NEW BASE LINE (Ctrl + / )
- It is used to move the Grainline / Baseline or Create the new Baseline.
- First keep the Grainline / Baseline outside the pattern. Select Grainline + (I) ), Now move the
Grainline outside. The grainline is moved.
- Select the tool New Baseline. The Grainline /Baseline gets fitted into the pattern.
ROTATE TO INITIAL BASELINE (Shift + / )

(E.g.) If the pattern is in Tilted / Flip / Angled position. Then to bring the pattern to original position.
- Select the Rotate to Initial Baseline Tool
- Click the piece
- The Grainline get set as before / pattern piece

SET BASELINE DIRECTION (/)
- Select the first point to determine the Baseline direction.
- Select the second point to determine the Baseline direction.
- The grainline changes to the direction as selected.
- e.g If you select vertical line the grainline changes to vertical direction.
SET BASE LINE PERPENTICULAR

- Select the first point to determine the Baseline direction.
- Select the second point to determine the Baseline direction.
- The baseline now becomes perpendicular to the line selected.
SET HALF PIECE LINE (H) • If you move any point or amend

- Select the first point for the Half line (Shift + Alt) changes in one side, both the side
gets changed.
- Select the second point for the Half line. • If you remove the mirror X in piece

- New half Piece is created (It is Shadowed. If you do properties, then you can change /

amendment in one side, the other side also changes.) amend in one side only, the other
side does not change.
SET MIRROR LINE (Ctrl + Alt + H)
- Select the first point for the Mirror Line
- Select the Second point for the Mirror Line
- The pattern second half is opened.

112

CITS : Apparel - Dress Making - Lesson 8 & 9