Page 157 - CITS - ED - Mechanical
P. 157
ENGINEERING DRAWING - CITS
Fig 2 Fig 3
Fig 5
Fig 4
Procedure
Rivets and Riveted joints
Exercise 8.25
Snap head rivet (Fig 1)
Fig 1
Draw a snap head rivet suitable for joining plates of 25 mm thick.
Diameter of rivet = 6 x 25 = 6 x 5 = 30 mm
• Draw a thin horizontal line.
• Draw vertical centre lines.
• Mark diameter of rivet shank and head.
• Form the rivet head as per proportions.
144
CITS :Engineering Drawing (Mechanical) - Exercise 8