Page 165 - CITS - ED - Mechanical
P. 165
ENGINEERING DRAWING - CITS
Exercise 8.36
Riveted joint with connection plates at right angles
Draw the riveted joints connecting plates at right angles with a & b bent plate c angle iron, plate thickness 25.
Using bent plate
• Draw the plate bent at radius not less than 2t.
• Mark the centre of the rivet 1.5d from centre of arc.
• Draw the other plate to be riveted and rivet (two methods are shown)
• Show proportions of Fig 12a and b.
Using angle plate
• Mark the centre of rivet holes at 1.5d + t from the corner of the angle plate.
• Draw the plates, draw the rivets and hatch.
• Show proportions. (Fig 12c)
Fig 12
152
CITS :Engineering Drawing (Mechanical) - Exercise 8