Page 169 - Electronic Mechanic - TP - Volume - 2

ELECTRONICS MECHANIC - CITS

Parts Explanation Photo Explanation

6 Lift out the motor.
5 When replacing the motor, be
sure to remount it in the correct
position.

NOTE:The shaft of motor should
Drive Motor Fit tip coupler.

COVER FIXING SCREW : 6 When reassemble a drive
MATCHINESCREW(6006-001170) motor cover. Give a turn in a
180° and fix with a screw.

NOTE:Bring the spare screw
from service center

Replacement of Control Circuit Board
Parts Explanation Photo Explanation
1 Be sure to ground any static
electric charge in your body
and never touch the control
circuit.
2 Disconnect the connectors
from the control circuit board.
Removal of Control
Box Assembly 3 Remove screws securing the
control box assembly.
4 Remove the screw securing the
ground tail of the keyboard.

1 Remove screws securing the
control circuit board.
Remove P.C.B 2 Lift up the control circuit board
Assembly
from the Ass’y control box.

152
CITS : E & H - Electronics Mechanic - Exercise 161