Page 383 - Electronic Mechanic - TP - Volume - 2

ELECTRONICS MECHANIC - CITS

You can use the BOP for the following operations:
• Standalone commissioning

• Diagnosis
• Parameter access
• Parameter settings
• SD card operations

• Drive restart
Commissioning in speed control mode (S)

Step Description Remarks

1 Switch off the mains supply.
2 Power off the servo drive and connect it to The digital signals CWL, CCWL and EMGS must be
the controller (for example, SIMATIC S7-200 kept at high level (1) to ensure normal operation.
SMART) with the signal cable.
Refer to "Standard application wirings (factory
setting) (Page 73)" and "Connection examples with
PLCs (Page 77)".

3 Power on the servo drive.
4 Switch to the speed control mode by setting Refer to "Compound controls (Page 125)".
p29003=2.
5 Restart the servo drive to apply the settings of
the speed control mode.

366
CITS : E & H - Electronics Mechanic - Exercise 241