Page 295 - CITS - Fashion Design Technology - Trade Practical

FASHION DESIGN & TECHNOLOGY - CITS

TASK 5: Make Paper pattern from Bias panels
1 Place the fabric panels on large piece of pattern paper. Adjust for distortion of the fabric by pushing, stretching,
and patting the fabric into place until the marked grain and crossgrain are at right angles. Trace draped pattern
panels on paper and mark grain lines.

2 Add seams allowance to paper patterns Fig 1
3 Empire front and back: ½” (1.2 cm) at the empire top, ¾” (2 cm) at the side seams. If a CB-seam is needed,
add ½” (1.2 cm).
4 Bra-top: ¼” (0.6 cm), side seams ¾” (2 cm), bottom ½” (1.2 cm).

5 Cut a full set of guide patterns (left and right) from pater and prepare the pattern layout for cutting in design
fabric

Fig 1

TASK 6: Lay out the pattern (Fig 1)

Fig 1

280

CITS : Apparel - Fashion Design & Technology - Exercise 24