Page 294 - CITS - Fashion Design Technology - Trade Practical
P. 294
FASHION DESIGN & TECHNOLOGY - CITS
Fig 1 Fig 2
7 Mark seams on the right side. The excess is trimmed to within 1" (2.5 cm) of the empire style line. Smooth and
pencil rub the side seam waist to hip on the right. Slash side seam to within 1/8" (o.3 cm) of the waist and the
HBL. Pin.
8 Fold the right side seam from hip to hem, crossing at the 4" (10 cm) mark.
9 Measure the hemline up from the floor and trim.
10 Remove front panel, fold on centerline and trace the seams from the right to the left side.
TASK 4: Draping for Back part
1 Start the drape with the center true bias line on the CB seam.
2 Continue draping along the style line.
3 Mark and slash the side seam at the waist and the HBL as for the front panelas shown in Fig 1
4 Mark 4” (10 cm) out from the side seam at the base of the form to add flare to match the front
5 Panel side seam angle. Mark and trim this side seam. Measure the hemline up from the floor and trim.
(Fig 2)
6 Pin the side seams of the front and back panels together to the outside from the empire line to the hip. The
remaining seam is left unpinned to allow the bias to fall freely. Add weights at the hemline to expedite the bias
stretch and let the drape hang overright. Fig 3.
Fig 1 Fig 2 Fig 3
279
CITS : Apparel - Fashion Design & Technology - Exercise 24