Page 291 - CITS - Fashion Design Technology - Trade Practical
P. 291
FASHION DESIGN & TECHNOLOGY - CITS
Turn the waist band upwards and press on waistline. Fold waist band on center line matching balance marks.
Press and baste. Stitch from right side of waist band in the crevice of previous seam line. (Fig 10)
Turn to the right side. Stitch in the crevice of waist seam line.
Finish the end of extension with blind hemming.
Finish the right waist band in the same manner. (Fig 11)
Fold under the upper edge of the belt carriers for 0.5 cm, baste edge 0.2 cm below the upper waistband edge. Top
stitch twice. (Fig 12)
Fig 11 Fig 12
FDC22P0292
Lift presser foot and turn belt carrier up to the upper side of waist band and lower presser foot. Stitch back on same
place but top stitch now over the belt carrier. With the help of bar tacking machine, bell carrier can be stitched
easily since the material might be thick. Stitching in treadle machine is slightly difficult due to thick material. Bar
tacking machine is mostly used in industries for mass production to give good finish. (Fig 13)
Fig 13
FDC22P0293
BAR TRACKING MACHINE
276
CITS : Apparel - Fashion Design & Technology - Exercise 23