Page 288 - CITS - Fashion Design Technology - Trade Practical
P. 288
FASHION DESIGN & TECHNOLOGY - CITS
Fig 4 Fig 5 Fig 6
Stitch the right fly (shield): Take right sides of fly and lining together. Baste and stitch on outer shape. Cut
notches on the round shape. (Fig 7)
Turn right side out. Press and set the outer edge and baste on it up to end. Turn also the edge of the balance part
of lining. Cut notches on the inner curved shape of lining. (Fig 8)
Fold the edge of lining by 1.5 cm to wrong side. Align edge of lining and shield. Baste and press on the lining.
(Fig 9)
Fig 7 Fig 8 Fig 9
Open the zip. Baste the unattached zip part to the fly shield, wrong side of zip on right side of fly shield. Stitch
along the basting but don’t stitch the shield lining. Be careful: the position of the zip should be same as in left side
facing. (Fig 10)
Close the zip. Place right front piece under left front piece with right sides together. Edge of fly line of right front
has to extend the fly line of left front by 1 cm. Baste zip and shield on the right front short piece along the fly line.
Stitch over the previous seam line up to the clip. Turn away lining piece. (Fig 11)
Fig 10 Fig 11
273
CITS : Apparel - Fashion Design & Technology - Exercise 23