Page 285 - CITS - Fashion Design Technology - Trade Practical
P. 285

FASHION DESIGN & TECHNOLOGY - CITS




           (12 Cms.) and mark point 25C according to half of the dart width (1.25 Cms). Join 25A and 25C. For marking use
           tailor’s chalk. (Fig 1).

           Fold the fabric on the line 25-25A with right sides together and stitch on the mark with machine (Fig 2).
           Press the dart using iron box. (Fig 3).

             Fig 1                           Fig 2                  Fig 3















           Skill Sequence


           Cutting the parts by open layout method

           At the end of this exercise, you will be able to
           •  prepare an inseam pocket.


           Take two pieces of drill fabric (25 x 13 cm). Mark points at a distance of 3 cm and 13 cm from top edge on longer
           side.
           Cut notches on both the marks.
           Cut one piece of pocket pouch cloth (22 x 20 cm). Fold the fabric lengthwise.

           Cut two pieces of casement cloth (13 x 5 cm) for pocket stay jetting.
           Cut notches on one longer side of jetting piece leaving 1.5 cm from upper and lower edge. (Fig 1)

             Fig 1

















              Note: Depth of all notches should be of 1 cm

           Shape pocket pouch
           0-1= 22 cm pouch length
           1-2 = 1-3 = 5 cm

           2-4 = 1.5 cm
           Join 2-4. Shape round 3-4. Cut on the marked lines.
           Cut on the marked lines Cut notches from top (i.e. point 0) and 5 cm from lower corner (i.e. point 2) (Fig 2).


                                                           270

                                CITS : Apparel - Fashion Design & Technology - Exercise 23
   280   281   282   283   284   285   286   287   288   289   290