Page 281 - CITS - Fashion Design Technology - Trade Practical
P. 281
FASHION DESIGN & TECHNOLOGY - CITS
EXERCISE 23 : Construct Ladies’ Trousers
Objectives
At the end of this exercise, you will be able to
• prepare patterns for a ladies’ Trousers
• cut and sew the ladies’ Trousers.
Requirements
Tools/Equipments/Instruments
• ‘L’ Square - 1 No. • 5 thread over lock machine - 1 No.
• 1 feet scale - 1 No. • Bar tacking machine - 1 No.
• Set Square - 1 No. • Cutting table - 1 No.
• Curved Scale - 1 No. • Iron Box - 1 No.
• French Curve - 1 No. Materials
• Pattern Cutting Scissors - 1 No.
• HB pencil - 1 No. • Brown paper (90 GSM) - 3 Nos
• Pencil Eraser - 1 No. • Carbon paper (Big Size) - 1 No.
• Blue Ink Pen - 1 No. • Suiting Fabric - 1.20 m.
• Green Ink Pen - 1 No. • Poplin fabric - 0.40 m.
• Red Ink Pen - 1 No. • Interfacing fabric - 0.05 m.
• Single Needle Industrial model • Zip - 1 No.
Lock stitch sewing machine - 1 No. • Pant hook and eye - 2 sets.
Procedure
TASK 1: Prepare pattern for ladies trouser
1 Collect the required measurements for Laides’ Trousers of a suitable size from the measurement chart. Hip =
94 Cms., Waist = 68 Cms., Waist to hip = 20.6 Cms., Bodyrise = 28 Cms., Length = 104 Cms., Bottom = 22
Cms.
2 Place the brown paper on the pattern making table.
3 Draft the Ladies’ Trousers patterns using pencil as per the instructions given as follows.
Front Part
0-1 = 3 Cms. Waist Band width.
0-2 = 29 Cms. Body rise+1 Cm. of Seam.
0-3 = 105 Cms. Length + 1 Cm. for seam.
3-4 = 43 Cms. Half of (2-3) + 5 Cms.
Draw Perpendicular lines using set square and ‘L’ square from point 1 (Waist line), point 2 (Crutch point line),
266