Page 277 - CITS - Fashion Design Technology - Trade Practical
P. 277

FASHION DESIGN & TECHNOLOGY - CITS




           Shape front armhole by joining 0-a-b-3
           C is ¾” above from 0’
           D is 3/8” above from 3’
           Shape back armhole by joining 0-c-d-3
           2-2’      = ¼”

           2’-4      = ½ wrist around +2½” or 2/3rd of 1-3
           Join 4-2 & 4-3
           5 is midpoint of 3-4. Join 5-3 with inside curve line.
           Join 4-2 ¼” inside curve for sleeve’s front side only.

           6 is midpoint of 4’-2 and make 6” cuff opening for sleeve’s front side only.
           Collar

















           0-1 & 2-3       = 3”
           0-4 & 3-5       = 1¾”
           0-3 & 1-2       = ½ neck around measurement

           6 is midpoint of 0-3 and 6’ is midpoint of 4-5
           3’ is 1½” above from 3. Join 6-3’
           x is 1½” from 5 and x’ is ¼” below from x. join x’-3’
           7 is marked 1½” away from 2 and 2’ ¼” above from 2.
           Now join 7-2’-x’-6’ with curved lines (refer Draft)

           Cutting line: 0-6-3’-x-x’-6’- 4 for collar. 0-4 on fold
           1-7-2’-x’-6’-4 for collar stand. 4-1 on fold
           Pocket
























                                                           262

                                CITS : Apparel - Fashion Design & Technology - Exercise 22
   272   273   274   275   276   277   278   279   280   281   282