Page 348 - CTS - Mechanic Diesel - TP
P. 348
MECHANIC DIESEL - CITS
Fig 3
By-pass assembling
It should be done in the opposite order:
1 Check the good flap state and its seat. Screw the screw with the same number of rotation as during the
dismantling.
2 This is by-pass designed as safety equipment it has to be used only in case of incident or cold start but it must
not be used as a discharge regulator.
3 If you notice any flap or seat deterioration one must control the instant pressure.
Fig 4
TASK 2: Assembling of rotor pump
Assembling should be done in the opposite way of dismantling.
331
CITS : Automotive - Mechanic Diesel - Exercise 18.6
