Page 18 - Mechanic Diesel - TT

MECHANIC DIESEL - CITS

Safety slogans

Whether you are at work, or at home or at play, safety should always be in the front of our minds. Following are
few safety slogans which you can remember:
1 ”A casual attitude towards safety = CASUALTY”

2 “Accidents hurt - safety doesn’t “.
3 “A wound neglected is a wound infected”.
4 “ Do your work with pride, put safety in every stride”.
5 “Don’t be a fool, use the proper tool”.

6 “Safety starts with ‘S’ but begin with ‘U’!
Seven Basic Tools of Quality Control: The Appropriate Techniques for Solving Quality Problems in the Organization.
Abstract
Dr. Kaoru Ishikawa was first total quality management guru, who has been associated with the development
and advocacy of using the seven quality control (QC) tools in the organizations for problem solving and process
improvements. Seven old quality control tools are a setoff the QC tools that can be used for improving the
performance of the production processes, from the first step of producing a product or service to the last stage of
production. So, the general purpose of thispaperwastointroducethese7QCtools.This study found that the set tools
have the significant roles to monitor, obtain, analyze data for detecting and solving the problems of production
processes, in order to facilitate the achievement of performance excellence in the organizations.
Keywords: Seven QC Tools; Check Sheet; Histogram; Pareto Analysis; Fishbone Diagram; Scatter Diagram;
Flowcharts, and Control Charts.
Introduction
There are seven basic quality tools, which can assist an organization for problem solving and process improvements.
The first guru who proposed seven basic tools was Dr. Kaoru
Ishikawa in 1968, by publishing a book entitled “Gemba no QC Shuho” that was concerned managing quality
through techniques and practices for Japanese firms. It was intended to be applied for “self-study, training of
employees by foremen or in QC reading groups in Japan. It is in this book that the seven basic quality control
tools were first proposed. valuable resource when applying the seven basic tools (Omachonu and Ross, 2004).
These seven basic quality control tools, which introduced by Dr. Ishikawa, are: 1) Check sheets; 2) Graphs
(Trend Analysis); 3) Histograms; 4) Pareto charts; 5) Cause-and-effect diagrams; 6) Scatter diagrams; 7) Control
charts. Figure 1 indicates the relationships among these seven tools and their utilizations for the identification and
analysis of improvement of quality (Kerzner, 2009).

Fig 2

5
CITS : Automotive - Mechanic Diesel - Lesson 01 - 04