Page 34 - Mechanic Diesel - TT

MECHANIC DIESEL - CITS

c where a floor is liable to become wet in the course of any manufacturing process to such effective means
of drainage shall be provided as maintained; -

Fig 22

All inside walls and partitions, all ceilings or tops of rooms and all walls, sides and tops of passages and staircases
shall be repainted or re-varnished at least once in every period of five years;
1 where they are painted with washable water paint, be repainted with at least one coat of such paint at least
once in every period of three years and washed at least once in every period of six months;
2 where they are painted varnished or where they have smooth impervious surfaces, be cleaned at least one
in every period of fourteen months by such methods as may be prescribed

3 in any other case, be kept whitewashed, or Colour washed, and the whitewashing or colour washing shall be
carried out at least once in every period of fourteen months;
4 all doors and window-frames and other wooden or metallic framework and shutters shall be kept painted or
varnished and the painting or varnishing shall be carried out at least once in every period of five years;
5 the dates on which the processes required by clause ‘d’ are carried out shall be entered in the prescribed
register.
6 If, in view of the nature of the operations carried on in a factory or class or description of factories or any part
of a factory or class or description of factories, it is not possible for the occupier to comply with all or any of the
provisions of sub-section (1), the State Government may by order exempt such factory or class or description
of factories or part from any of the provisions of that sub-section and specify alternative methods for keeping
the factory in a clean state
Disposal of wastes and effluents (Fig 23)
• Effective arrangements shall be made in every factory for the treatment of wastes and effluents due to the
manufacturing process carried on therein, so as to render them innocuous, and for their disposal.
• The State Government may make rules prescribing the arrangements to be made under sub-section (1) or
requiring that the arrangements made in accordance with sub-section (1) shall be approved by such authority
as may be prescribed.
Control measures for vapor clouds formation and combating & Workplace Exposure Limit
The following control measures focus on actions and tactics that can be considered once a flammable material is
in the vapor phase. Control measures for preventing vaporization from an uncontained liquid will be considered
under

1 Where flammable vapors are released under pressure, such as when escaping from a ruptured pressurized
container, their temperature will drop rapidly. Because of this, even vapors that are lighter than air will sink to
low-lying areas initially and therefore the highest concentrations of vapor will be found low to the ground and

21
CITS : Automotive - Mechanic Diesel - Lesson 01 - 04