Page 275 - Electronic Mechanic - TP - Volume - 2

ELECTRONICS MECHANIC - CITS

EXERCISE 192: Construct and perform bidirectional

control a double acting cylinder

Objectives

At the end of this exercise you shall be able to
• select the components to construct bidirectional control of the double acting cylinder
• construct the circuit on trainer board as per the diagram
• check the performance of the circuit.

Requirements

Tools/ Materials
• Pneumatic trainer board - 1 No. • Double Acting Cylinder - 1 No.
• Digital multimeter with probes - 1 No. • 5/2 DC double solenoid valve - 1 No.
• Regulated DC power • Push button switch - 1 No.
supply 24V/2A - 1 No. • Relay - as reqd.
• Pneumatic Source - 1 No. • PU Tube - as reqd.
• FRL - 1 No. • Connecting cables

Procedure
TASK 1: Select the components to construct bidirectional control of the double acting cylinder

1 Select the components to construct the circuit using ISO 1219 symbol.
2 Check the DC supply by using multi meter

TASK 2 & 3 : Construct the circuit for bidirectional control of the double acting cylinderA Pneumatic
Connection

A Pneumatic Connection

1 Connect the Compressor to the FRL
2 Set the FRL for 6 bar
3 Connect the FRL to the Manifold
4 Connect input port (Port No.1 or P) of the 5/2 Solenoid valve to the Manifold.

5 Connect Output port (Port No.2) of the 5/2 Solenoid valve to the Input (Piston Rod end side) of the Double
Acting Cylinder
6 Connect another Output port (Port No.4) of the 5/2 Solenoid valve to the Input (Piston head end side) of the
Double Acting Cylinder

258