Page 277 - Electronic Mechanic - TP - Volume - 2

ELECTRONICS MECHANIC - CITS

EXERCISE 194: Construct and control the Oscillating

motion of a double acting cylinder

Objectives

At the end of this exercise you shall be able to
• select the components to construct and control the oscillating motion of a double acting cylinder
• construct the circuit on trainer board as per the diagram
• check the function of the circuit.

Requirements

Tools/ Materials
• Pneumatic trainer board - 1 No. • 5/2 DC double solenoid valve - 1 No.
• Digital multimeter with probes - 1 No. • Push button switch - 1 No.
• Regulated DC power • Relay - 2 Nos.
supply 24V/2A - 1 No. • Limit Switch - as reqd.
• Pneumatic Source - 1 No. • PU Tube - as reqd.
• FRL - 1 No. • Connecting cables
• Double Acting Cylinder - 1 No.

Procedure

TASK 1: Select the components to construct and control the automatic return of a double acting
cylinder
1 Select the components to construct the circuit using ISO 1219 symbol .
2 Check the DC supply by using multi meter

TASK 2 & 3 : Construct the circuit and control the oscillating motion of a double acting cylinder

A. Pneumatic Connection

1 Connect the Compressor to the FRL
2 Set the FRL for 6 bar
3 Connect the FRL to the Manifold
4 Connect input port (Port No.1 or P) of the 5/2 Solenoid valve to the Manifold.
5 Connect Output port (Port No.2) of the 5/2 Solenoid valve to the Input (Piston Rod end side) of the Double
Acting Cylinder

260