Page 360 - Electronic Mechanic - TP - Volume - 2

ELECTRONICS MECHANIC - CITS

Step Result on display

4 Value level

5 Press until P1082 is displayed

6 Valueleves Press to access P1082

7 Press to select desired maximum frequency.
Press to save and exit

8 Value level Press to return to P0010

9 Press to access P0010 Value level

10 Press to return value to P0010 = 0
Press to save and exit

11 Press to return or 0000 Press to exit
Parameterization
The LCD will alternate between actual frequency
and the requested frequency set point.

The required maximum frequency has now been stored.
The following parameters must be followed through in their entirety to ensure optimized and efficient operation
of the inverter. Please note that P0010 must be set to‘1= Quick Commissioning ’ to allow this procedure to be
carried out.

Result: Thus the commissioning and parameter programming of MM420 has been completed with BoP panel.

343
CITS : E & H - Electronics Mechanic - Exercise 232 & 235