Page 251 - CITS - Fitter Trade Pactical - Volume - 2

FITTER - CITS

Select offset button press in geomentry mode.
Use cursor select tool no 2 and z axis.
Enter Z0.
Enter Z0 press Measure in soft key

Now z axis tool offset OK.
Tool offset is Z axis is saved
Second tool offset
Select MDI mode Press MDI Prog Screen.
Enter tool no (Threading tool) T0300 Press Reset button Press Cycle start.
Select jog mode or MPG mode then move axis.

Same procedure MPG mode incremental touch job in x axis with piece of paper Do not distrub X axis (Fig 3).

Fig 3

Select offset button press in geomentry mode.
Use cursor to select tool no 3 and x axis.

Enter constant same dia.
Ex: x28.62 Press Measure button in soft key
Threading tool offset measurement
Z axis offset
Select MPG mode in incremental variation. To move axis z position.

To check by inserting a piece of paper between tool and the job ensuring that there is no disturbance in Z axis (Fig 4).

Fig 4

236

CITS : C G & M - Fitter - Exercise 57