Page 166 - CTS - Mechanic Diesel - TP

MECHANIC DIESEL - CITS

Fig 1 Fig 2

10 Install the brush holder.
11 Install 4 sets of brushes with the springs.
12 Install the brush holder cover.
13 Apply grease and install the commutator end housing (1) as shown in the Fig 3
14 Replace the magnetic switch (3) and its boot (1) with a new one if required. (Fig 4)

15 Apply grease to the plunger’s (2) hook.(Fig 4)
16 Hook the switch plunger with the drive lever.(Fig 4)
17 Fasten the switch assembly with nuts.
18 Connect the lead wire.

Fig 3 Fig 4

149

CITS : Automotive - Mechanic Diesel - Exercise 9.2