Page 168 - CTS - Mechanic Diesel - TP

MECHANIC DIESEL - CITS

5 Hold the armature in an armature clamping device or in a vice fitted with soft metal or wood jaw clams
6 Remove lubricating plug
7 Remove split pin and nuts (1) and washer from front end of pinion and slide pinion (2) ad drive and shield
(40) off the armature shaft
8 Remove pinion spring (37)
9 Collect clutch inner race (39) clutch plates shim washers, back ring, and pressure plates from clutch
assembly

Note: The clutch plates (38) should be tried together in the order of removal so that they can
be replace in their original positions in the clutch when the starter is reassembled.

10 Withdraw shims and rubber sealing ring from bore of pinion

11 Undo armature plunger retaining nut (32) by means of tubular spanner
12 Withdraw armature plunger from bore of armature.
13 Remove the screws (16) securing positive terminal connector, main field coil ends and auxiliary field
connections to solenoid switch

14 Separate carefully the commutator end shield from the yoke by tapping with a hide or wooden mallet.
15 Disconnect the solenoid coil leads
16 Unscrews solenoid fixing screw (14) and remover solenoid switch (15)

151

CITS : Automotive - Mechanic Diesel - Exercise 9.3