Page 146 - CITS - ED - Mechanical
P. 146

ENGINEERING DRAWING - CITS





             Fig 3















           1 inch BSW has 8 threads per inch.
           Therefore the pitch = 1/8 inch = 3 mm approximately.
           H = 0.968P
           Radius of curve = 0.137P
           Draw the thread profile to the enlarged scale 10:1.  Assume the dimensions suitably and complete the drawing.

           Exercise 8.4

           Draw the profile of square thread (φ 30 mm & pitch 6 mm) (Fig 4)


              Fig 4













           Depth of thread = 0.5P
           Thread angle = 90°
           Draw profile of square thread to a suitable magnified scale according the space available.
           Exercise 8.5, 8.6 & 8.7

           Draw the profiles of Acme, buttress and knuckle threads by referring figures 2,3 & 4 of Exercise different types of
           thread Ex.15.  Use suitable enlarged scale according to the availability of space in the workbook sheet.
           Exercise 8.8

           Draw the conventions of external and internal thread with edge views. (Fig 5)
           Draw the conventions of threads as shown above also indicate the type and size of thread as mentioned in the
           dimensioning technique exercise.



              Fig 5














                                                           133
                                     CITS :Engineering Drawing (Mechanical) - Exercise 8
   141   142   143   144   145   146   147   148   149   150   151