Page 225 - CITS - ED - Mechanical
P. 225

ENGINEERING DRAWING - CITS



           Symbols with Additional indications: These may be used singly, in combination or combined with an appropriate
           symbol given in Table 6.
                                                        TABLE 6


                                     Symbol          Meaning


                                                     Production Method:  Milled




                                                     Sampling length 2.5 mm







                                                     Direction of lay: Perpendicular to
                                                     the plane of projection of the view.




                                                     Machining allowance 2 mm



           Simplified symbols

                                                        TABLE 7
                                   Symbol         Meaning


                                                  A note indicates the meaning
                                                  of the symbol




                                                  A note indicates the meaning
                                                  of the symbols.



           Symbols with indication of the Principal criterion of roughness
                                                        TABLE 5

                              SYMBOL

                Removal of material by machining is
                Optional               Obligatory             Prohibited                 MEANING



                                                                                A surface with a maximum surface
                                                                                roughness value of 3.2 µm



                                                                                A surface with a maximum surface
                                                                                roughness value of 6.3 µm and a
                                                                                minimum of 1.6 µm




                                                           212
                                     CITS :Engineering Drawing (Mechanical) - Exercise 9
   220   221   222   223   224   225   226   227   228   229   230