Page 115 - CITS - Fitter Trade Pactical - Volume - 2
P. 115

FITTER - CITS




           2  Filling Square Form
           When the stud is broken a lilttle above the surface form a square on the projecting portion to suit a standard
           spanner. Then turn it anticlockwise using a spanner to remove it. (Fig 2)

             Fig 2














           3  Using square taper punch
           Broken stud can also be removed by drilling a blind hole (hole diameter equals to half of stud diameter) and
           driving a square taper punch into the hole as shown in Fig 3. Turn the punch using a suitable spanner in an anti
           - clock- wise direction to unscrew the stud.

             Fig 3



















           4  EZY - out method (Fig 4)

           Ezy - out or a stud extactor is a hand tool, somewhat similar to the form of a taper reamer but has left hand spiral.
           It is available in a set of 5 pieces. The recommended drill size is punched on each ezy - out .
           After drilling the hole recommended ezy - out is set on it and turned in an anti - clockwise direction by a tap
           wrench. As it is rotated it penetrates into the hole increasing its grip and in the process the broken stud gets
           unscrewed. (Fig 4)

             Fig 4
























                                                           100

                                            CITS : CG & M - Fitter - Exercise 33
   110   111   112   113   114   115   116   117   118   119   120