Page 104 - CITS - Welder - Trade Practical
P. 104
WELDER - CITS
EXERCISE 19 : Fillet weld - Lap joint on M.S sheet 3mm
thick in vertical position by dip transfer 3F
Objectives
At the end of this exercise you shall be able to
• prepare the plates and tack weld than as lap joint
• set the tack welded joint in the weld positioner in vertical position
• set the root run and 2nd run by weaving bead slightly
• ensure proper cleaning of the plate surfaces and inter bead cleans
• clean and inspect for surface defects on the weld and bead appearance.
87