Page 292 - CITS - ED - Mechanical
P. 292
ENGINEERING DRAWING - CITS
4 Pick Objects to copy.
Select objects: (select)
5 Pick A point to move from.
Base point or displacement /multiple: (pick point).
6 Pick A point to copy to.
Second point of displacement: (Pick point)
(or)
7 Type A point to copy to.
Second point of displacement: @1<0
TIP
To copy many objects in the same copy command, type M for Multiple at the “Base point or displacement/Multiple”
option.
Offset command (Fig 4)
Fig 4
Offset distance
To offset a specified distance:
1 Choose Modify, Offset.
(or)
2 Choose The offset icon.
(or)
3 Type OFFSET at the command prompt.Command: OFFSET or O
4 Type The distance to offset. Offset distance or <Through point>: (number)
5 Pick The object to offset. Select object to offset: (select object)
6 Pick A side to offset object to. Side to off set: (pick side)
7 Pick Another object to offset
Select object to offset: (Pick side)
(or)
8 Press Enter to end the command.
Offsetting objects by specifying a distance
Offset through point (Fig 5)
Fig 5
279
CITS : Engineering Drawing (Mechanical) - Exercise 12