Page 297 - CITS - ED - Mechanical
P. 297

ENGINEERING DRAWING - CITS





               Fig 11                                            Fig 12















           3     Type       BREAK at the command prompt. Command: BREAK
           4     Pick       Object to break.
                            Select object: (select one object)
           5     Pick       A second break point. Enter second point: (point)
           6     Type       F to choose a different break point Enter second point (or F for first point): (F)
           7     Pick       The first break point on the object
                            Enter first point: (point)
           8     Pick       A second break point
           TIP
           You can also type coordinates instead of picking a break point. Enter second point (or F for first point): @3’<0

           If you break a circle, it changes to an arc by deleting the portion from the first point to the second, going
           counterclockwise.
           Breaking a polyline with nonzero width will cause the ends to be cut square.
           Mirror command (Fig 13)


              Fig 13














           1     Choose  Modify, mirror.
                          (or)
           2     Click    The mirror icon
                          (or)
           3     Type     MIRROR at the command prompt.
                          Command: MIRROR
           4     Pick     Objects to mirror. Select objects: (Select)
           5     Pick     First point of mirror line: (point)

           6     Pick     Second point of mirror line: (Point)
           7     Type     Yes to delete the original objects and No to keep them.
                          Delete old objects? Y or N


                                                           284
                                  CITS : Engineering Drawing (Mechanical) - Exercise 12
   292   293   294   295   296   297   298   299   300   301   302