Page 222 - CITS - Fitter Trade Pactical - Volume - 2
P. 222
FITTER - CITS
Fig 7
Gas cutting of MS plates
Objectives : At the end of this exercise you shall be able to
• mark cutting lines on the plate by keeping proper cutting allowance
• set the job for straight, bevel, circle and profile cutting
• select the cutting nozzle No. and the cutting oxygen pressure for different plate thickness
• adjust the preheating flame and preheat the metals
• cut straight line bevel, circle and profile by hand and machine
• clean the gas cut edges and inspect for defects.
207
CITS : C G & M - Fitter - Exercise 54
