Page 176 - CTS - Mechanic Diesel - TP

MECHANIC DIESEL - CITS

Hold in test
- While connecting as stated above with the pinion out, disconnect the negative lead from terminal ‘C’
- Check that the pinion remains out; if not, replace the magnetics witch.

No-load performance test
- Connect the test leads as shown in the figure. (Fig 3)
- Check the motor runs without fail with the pinion moved out.
- Check that the ammeter indicates the specified current. (No - load current - less than 53A at 11.5V)
(Fig 3 & 4)

Fig 3 Fig 4

TASK 2: Fit the starter motor on the engine
1 Place the starter motor in its position. Tighten the two mounting bolts.
2 Connect the battery cable and magnetics witch lead wires to the starter motor terminals.

3 Connect the negative lead to the battery.

159

CITS : Automotive - Mechanic Diesel - Exercise 9.4