Page 257 - CITS - Welder - Trade Practical

WELDER - CITS

Job Sequence

• Cut the plate by using hacksaw cutting as per drawing
• Set the sheets and tack weld in the form of a “Tee” joint on the welding in flat position
• Fill the crater

• Manipulate the torch and filler rod in the correct position with respect job
• Stop the weld at the left-hand edge of the joint after filling up in the crater at the end of the weld
• The angular distortion between the vertical and horizontal sheets of the Tee joint is automatically controlled

• The current set is 10 to 15 ampere

240

CITS : C G & M - Welder - Exercise 62