Page 60 - CITS - Welder - Trade Practical
P. 60
WELDER - CITS
Fig 1
• Ensure to fill the crater and to clean the bead.
• Check for the size of fillet, bead profile, weld defects and rectify them.
Skill Sequence
‘T’ joint weld on MS plate 10mm in horizontal position
Objectives: At the end of this exercise you shall be able to
• set and weld ‘T’ joint on MS plate 10mm thick in horizontal position.
Fix the joint in a horizontal position. For this the bottom plate should be kept parallel to the ground and the other
plate perpendicular. Fig 1.
Fig 1 Fig 2
43
CITS : C G & M - Welder - Exercise 8