Page 65 - CITS - Welder - Trade Practical
P. 65
WELDER - CITS
EXERCISE 10: Fillet lap joint on MS plate 10mm thick in
horizontal position (SMAW)
Objectives
At the end of this exercise you shall be able to
• deposit bead at the bottom of the joint to the required size of the weld
• control the sagging of the molten metal with an oscillating motion of the electrode
• deposit root run to ensure fusion and penetration in lap section
• complete the weld by depositing second run on the lap joint without edge of plate melted off defect.
48